Hi,
Thanks for your detailed post. I have always added a few drops of dishwasher rinse aid with the iso-propyl and water so maybe the Ilfotol is better, I will certainly try it and also add it to the water when rinsing.

Hi,
I experienced the build up of debris on my stylus when I first used my Knosti. However, through experimentation I found that the stylus debris problem was associated with the supplied Knosti cleaning solution. I have settled on a homemade solution of 5% Iso-Propyl Alcohol, 95% Demineralised water with a few drops of Ilfotol (a wetting agent made by Ilford primarily for use during film…Read More

I use EAR Yoshino Phonobox

Elac Miracord 80 Turntable.
Ortofon MC Quintet Black S.

Hey Kenny. This is correct. If I led you a stray in the tutorial on this I apologise. Sadly the SSL 2+ doesn’t have a switchable input, so XLR is fixed at mic-level and the quarter-inch jack input at line-level. You could buy an adaptor from XLR to jack, but it would be better to just have the right cable.

Hi there – so are you saying that you rinse in clean/distilled water after using the Knosti diluted fluid to clean? Sounds like a good idea but also sounds like you still suffer from residue despite the rinsing. I’ve now disposed of my Knosti, tried the Project with similar poor results (considered Spin Clean but not tried it) and am now left with searching around for something else…Read More

I am a bit of a vinyl addict and currently have 17 turntables (15 of which are fully operational). This means that I have a large number of cartridges (more than one per deck!).
I use the Audio Technic ATVM95 range of MM cartridges extensively, mainly due to the general quality and the flexibility of having a range of five interchangeable styli. This allows me to use the bonded elliptical…Read More

Hi Shakey, I use the Knosti manual cleaner as well and experienced the same issue with gunk on my stylus. I also have tried weaker mixtures and never allow the record to dry fully before rinsing them. I would be glad of any solutions. Cheers

I use Voicemeeter Potato to send signal to Wavelab Elements for recording my Vinyl, then I use VinylStudio to clean it up (if necessary) and download covers and track details from Discogs.
I have a Schitt Mani pre-amp, Fluance RT85 Turntable.

@KRAZYKAT I still have the 2MBlue – great upgrade in the red 🙂

@KRAZYKAT – I’ve reviewed the Mani 2. It has more control over loading than the original, though I think the circuit is more surface-mount technology than the Mani 1, which means it’s less repairable if it goes wrong. If you’re happy with the Mani 1, I’m not sure I can say it’s that much of an upgrade. I’d hold off and save for something that might be more of a leap for you.

BTW: That…Read More

@gerhard – great! Sounds like you had a good day. I had family commitments in the end. Probably for the best as I’ll use the money I would’ve spent on some nice pre-loved records instead 🙂

@beachboy1965 – thanks for sharing. Dire Straits is an interesting one. It was the first DDD release on CD I believe.